Olympus DS-5500 - Page 44

44
3
EN
Editing the Work Type information
Editing the Work Type information
7 Press the F2(FINISH) button.
• TherecorderwillreturntotheWorkType
informationscreen.
• WhenyoucreateanewfileandinputaWork
Type,presstheF2(FINISH)buttonagainin
theFileinformationscreentogetenteredinto
thestopstateintheNewFile.
s Moving the entry column:
 Whenpressingthe+buttonifthecursorison
topoftheKeyboardwindow,thecursorwill
disappear.AnInputpositionwithintheinput
namedisplayareawillchangefromflashingto
lighting.
 9button:Eachtimethebuttonispressed,
theinputpositionmovesonespacetothe
right.TheInputpositioncanbemovedupto
thespacenext(right)tothelastcharacter.
 0button:Eachtimethebuttonispressed,
theinputpositionmovesonespacetotheleft.
TheInputpositioncanbemoveduptothe
firstcharacter.
 –button:TheInputpositionchangesfrom
lightingtoflashing.Thecursorislitonthe
“0”stringwithintheKeyboardwindow,and
makescharacterselectionavailable.
 Entryisperformedbyinsertentry.Whenthe
characterintheInputpositionhasalready
beenfinalized,thecharacterafterthecursor
willmoveonecolumntotheright.
s Maximum entered character count:
 TheOptionitemnamecanbeenteredupto
thenumberofcharactersspecifiedbelow.
Presetdefaultvaluescanalsobesetforthe
optionitemstosimplifydataentryprocess.
 Option item name:20characters
s Canceling the entered contents:
 PresstheF1(BACK)button,andselect
[Yes],thenpresstheOK/MENUbutton
when inputting characters:Thiswilldelete
theenteredcontentfortheselecteditem
andreturnyoutotheWorkTypeinformation
screen.
 PresstheF3(EXIT)button,andselect[Yes],
thenpresstheOK/MENUbuttonwhen
inputting characters:Thiswilldeletethe
enteredcontentfortheselecteditemand
returntherecordertostopmode.