EN 64
Playback functions
4
Lets you erase recorded images. You can select single-frame erase, which erases only the
currently displayed image; all-frame erase, which erases all the images stored on the card; or
selected frame erase, which erases only the frames selected.
Single-frame erase
S
1
Play back the image you want to
erase.
2
Press the
S
(erase) button.
3
Use
ac
to select [YES], then
press
i
.
All-frame erase
1
MENU
[
W
]
[CARD SETUP]
2
Use
ac
to select [ALL ERASE], then press
i
.
3
Use
ac
to select [YES], then press
i
.
•
All frames will be erased.
Erasing selected frames
This function lets you erase selected images at one time during single-frame playback or index
display.
1
Display the images you want to erase and
press the
i
button.
•
The selected images will be shown with red frames.
•
To cancel your selection, press the
i
button again.
•
During index display, press
p
to select the images you
want to erase and press the
i
button.
2
Press
p
to display the next images you want
to erase and press the
i
button.
3
After you have selected the images to erase, press the
S
(erase)
button.
4
Use
ac
to select [YES], then press
i
.
Erasing images
x
Notes
•
For image file types recorded using RAW+JPEG, single-frame erase erases only the JPEG
images while the RAW data is retained. For all-frame and selected frame erase, both the
RAW and JPEG images are erased.
•
Protected images cannot be erased. Cancel protected images, then erase them.
•
Once erased, images cannot be restored.
g
“Protecting images – Preventing
accidental erasure” (P. 63)
S
button
To Next Page
Loading...
