EN 65
5 Customizing the settings / functions of your camera
Normally, current camera settings (including any changes you have made) are retained when
the power is turned off. This camera allows you to restore the factory default settings using
[RESET]
and register 2 different reset settings in
[RESET1]
and
[RESET2]
for later use.
MENU
[
W
]
[CUSTOM RESET SETTING]
[RESET] / [RESET1] / [RESET2]
•
If settings have already been registered,
[SET]
is displayed next to the
[RESET1]
/
[RESET2]
option.
Registering reset settings
1
Select either [RESET1] / [RESET2] to register
and press the
d
button.
2
Select [SET] and press the
i
button.
•
To cancel the registration, select
[RESET]
.
Using reset settings
You can reset the camera to
[RESET1]
or
[RESET2]
setting or restore the factory default
settings.
[RESET]
: Resets to the factory default settings.
[RESET1]
/
[RESET2]
:
Resets to the registered settings.
1
Select either [RESET] / [RESET1] / [RESET2]
and press the
i
button.
2
Use
ac
to select [YES], then press
i
.
Custom reset setting
Customizing the settings / functions of your camera
5
To Next Page
Loading...
