70 EN
Customizing the settings / functions of your camera
5
Setting the beep sound
The camera beeps when buttons are pressed. You can turn the beep sound on or off with this
function.
MENU
[
Y
]
[
8
]
[OFF] / [ON]
Monitor brightness adjustment
This allows you to adjust the brightness of the monitor for optimal viewing.
MENU
[
Z
]
[
s
]
Use
bd
to adjust the brightness.
Sleep timer
After a specified period of time elapses with no operations being performed, the camera enters
the sleep mode (stand-by) to save battery power.
[SLEEP]
lets you select sleep timer.
[OFF]
cancels the sleep mode.
The camera activates again as soon as you touch any button (the shutter button, arrow pad,
etc.).
MENU
[
Z
]
[SLEEP]
[OFF] / [1MIN] / [3MIN] / [5MIN] / [10MIN]
USB mode
You can connect the camera directly to a computer or printer with the provided USB cable. If you
specify the device you are connecting to beforehand, you can skip the USB connection setting
procedure normally required every time you connect the cable to the camera. For details on how
to connect the camera to either device, refer to Chapter 6 “Connecting the camera to a
printer” (
g
P. 74) and Chapter 7 “Connecting the camera to a computer” (
g
P. 78).
MENU
[
Z
]
[USB MODE]
[AUTO]
The selection screen for the USB connection will be displayed every time you connect the
cable to a computer or printer.
[STORAGE]
Allows USB connection to a PC and transfer of data to the PC. Also, select to use the
OLYMPUS master software via PC connection.
[CONTROL]
Allows you to control the camera from a PC using the optional OLYMPUS Studio.
[
<
EASY]
Can be set when connecting the camera to a PictBridge-compatible printer. Pictures can be
printed directly without using a PC.
g
“Connecting the camera to a printer” (P. 74)
[
<
CUSTOM]
Can be set when connecting the camera to a PictBridge-compatible printer. You can print
out pictures with set number of prints, print paper and other settings.
g
“Connecting the camera to a printer” (P. 74)
To Next Page
Loading...
