Olympus E-400 - Direct Button Settings; Menu Settings

EN 17
Mastering the E-400
1
Setting functions using direct buttons
This camera is equipped with direct buttons where functions have been assigned and can be set
quickly.
1 Press the button for the function you want to set.
• The direct menu is displayed.
2 Turn the control dial to change the setting.
• Press the i button to confirm your setting. Or if you do not operate the control dial within
a few seconds, your setting will be confirmed and the control panel screen will be restored.
List of direct buttons
The functions assigned to buttons are as shown below.
Setting on the menu
1 Press the MENU button.
• The menu is displayed on the LCD monitor.
Direct buttons Function Ref. page
1
< / Y / j
Remote control / Self-timer /
Sequential shooting button
Remote control / Self-timer /
Sequential shooting
P. 39, P. 40
P. 4 1
2 F Exposure compensation button Exposure compensation P. 49
3 # Flash button
Pops up the flash and sets flash
mode
P. 3 5
Direct menu
Control dial
E.g.) Setting Sequential / Self-timer /
Remote control shooting
2
1
3
CUSTOM RESET
SETTING
Operation guide is displayed at the bottom of the screen.
CANCEL
Ja : Press MENU to cancel the setting.
SELECT
J/ : Press dac to select the item.
The illustration displayed corresponds to the arrow pad shown below.
:
a : c : d : b
GO Jf : Press i to confirm your settings.
MENU button
p Arrow pad
i button