EN 15
Mastering the E-400
1
How to make function settings
There are three basic ways to make function settings with this camera.
•
Setting while looking at the control panel screen (See below)
•
Setting using direct buttons (
g
P. 17 )
•
Setting on the menu (
g
P. 17)
Setting functions using the control panel screen
Select an item on the control panel screen and
change the setting.
1
When the power switch is set to
ON, the control panel screen
(shooting information and
setting screen) is displayed on
the LCD monitor.
•
The display changes each time the
INFO
button is pressed.
2
Press the
i
button.
•
The cursor (function being selected) on the control panel screen lights.
3
Use
p
to move the cursor to the function you want to set.
E.g.) When setting Sequential / Self-timer / Remote control shooting
How to set the functions
Power switch
Control dial
i
button
p
Arrow pad
INFO
button
Control panel screen
Basic
Display OFF
Detailed
Cursor
Direct menu
To Next Page
Loading...
