EN 71
Customizing the settings / functions of your camera
5
Changing the display language
You can change the language used for the on-screen display and error messages from
ENGLISH to another language.
MENU
[
Z
]
[
W
]
Use
ac
to select the language you want to use.
•
You can add another language to your camera with the provided OLYMPUS Master
software.
For details, refer to Help in OLYMPUS Master software.
Selecting the video signal type before TV connection
This lets you select NTSC or PAL according to your TV’s video signal type.
You will need to set this when you want to connect the camera to a TV and play back images in
a foreign country. Make sure the correct video signal type is selected before connecting the video
cable. If you use the wrong video signal type, recorded pictures will not play back properly on
your TV.
MENU
[
Z
]
[VIDEO OUT]
[NTSC] / [PAL]
TV video signal types in major countries and regions
Check the video signal type before connecting the camera to your TV.
AB
(Underwater mode)
It is possible to switch
[
J
(SPORT)]
and
[
U
(NIGHT+PORTRAIT)]
on the mode dial to
[
A
(UNDER WATER MACRO)]
and
[
B
(UNDER WATER WIDE)]
. Use an optional
underwater protector for underwater shooting.
MENU
[
Y
]
[
J
U
/
AB
]
[DIAL
J
U
] / [DIAL
AB
]
Firmware
Your product’s firmware version will be displayed.
When you make inquiries about your camera or accessories or when you want to download
software, you will need to state which version of each of the products you are using.
MENU
[
Z
]
[FIRMWARE]
Press
d
. Your product’s firmware version will be displayed. Press the
i
button to return to the
previous screen.
NTSC North America, Japan, Taiwan, Korea
PAL European countries, China
To Next Page
Loading...
