Why has the Olympus Recording Equipment become hot?
If the back of your Olympus Recording Equipment becomes hot when shooting movies, this is not a malfunction. If the recorder becomes abnormally hot, please contact the Olympus Customer Support Center.
Why did shooting stop midway on my Olympus Recording Equipment?
If shooting stopped midway on your Olympus Recording Equipment, it is because the size of a single file exceeded 4 GB. It is not possible to shoot exceeding 4 GB for a single file.
Why is noise audible through the recording monitor on my Olympus Recording Equipment?
If noise is audible through the recording monitor on your Olympus Recording Equipment, acoustic feedback might be occurring. When the built-in speaker amps and the like are connected there is a risk that audio feedback will occur while recording. It is recommended that you use earphones for the recording monitor, or turn the [Rec Monitor] to [Off] while recording. Also, perform adjustments, such as further distancing the earphones from the microphones, not pointing the microphones at the earphones, or lowering the volume of the recording monitor.
What to do if there is no playback sound heard on my Olympus Recording Equipment?
If you can't hear playback sound on your Olympus Recording Equipment, first, unplug the earphones to use the internal speaker. If that doesn't work, the volume level may be set to [00]. Adjust the volume level to resolve this.
Why am I unable to record through an external microphone on my Olympus Recording Equipment?
If you are unable to record through an external microphone on your Olympus Recording Equipment, and an external microphone supported by plug-in power is connected, make sure that [Plug-in Power] is set to [On]. Also, verify that [Input Jack] is set to [Microphone], not [Line].
Why am I unable to hear any sound from the earphone through the recording monitor on my Olympus Recording Equipment?
If you are unable to hear any sound from the earphone through the recording monitor on your Olympus Recording Equipment, check if [Rec Monitor] is set to [Off]. If it is, set [Rec Monitor] to [On].
Why is no sound picked up by the built-in microphone on my Olympus Recording Equipment?
If no sound is picked up by the built-in microphone on your Olympus Recording Equipment, it could be because an external microphone or external device is connected. Detach all external microphones and external devices connected to the MIC jack.
What to do if I am unable to erase the file on my Olympus Recording Equipment?
If you are unable to erase a file on your Olympus Recording Equipment, it could be because the file is locked. Unlock the file to erase it. Another reason may be that the file is read-only. Unlock the file or cancel the read-only setting of the file on your PC.
Why am I unable to set index marks on my Olympus Recording Equipment?
If you cannot set index marks on your Olympus Recording Equipment, it may be because the maximum number of marks has been reached; erase unnecessary marks. Alternatively, the file might be locked or read-only, so unlock the file. Also, index marks cannot be set for files in MP3 format.
What causes the recording level to be too high on my Olympus Recording Equipment?
If the recording level is too high on your Olympus Recording Equipment, adjust the recording level and try recording once more. If you still cannot record clearly, adjust the output level for the connected devices.
Guidelines for preventing damage and malfunction due to environmental factors.
Instructions for safe operation, storage, and handling of the recorder.
Guidelines to prevent battery leakage, overheating, and damage.
Safety instructions and precautions for using the AC adapter.
Step-by-step guide for inserting the lithium-ion battery into the recorder.
Instructions for charging the recorder's battery using a USB connection.
Instructions for charging the recorder using the AC adapter.
Important warnings and guidelines for using the rechargeable battery.
Step-by-step instructions for inserting an SD card into the recorder.
Steps to safely remove an SD card from the recorder.
Essential steps and checks before starting audio recording.
Detailed steps for starting and preparing an audio recording.
Guidance on optimal settings for various recording environments.
How to connect and use external audio input devices.
Steps to start and manage movie recording.
General information and steps for playing back recorded files.
How to delete individual audio or movie files.
How to delete all files within a selected folder.
Configuration options for recording parameters like sensitivity and format.
How to reset the recorder by formatting the memory.
Step-by-step guide to connect the recorder to a computer.
Safe procedures for disconnecting the recorder from a PC.
How to copy recorded files from the recorder to a PC.
Common issues and solutions for recorder problems.
General| Impedance | 8 Ω |
|---|---|
| MP3 bit rates | 32 - 320 Kbit/s |
| Playback time | 2 h |
| Frequency range | 20 - 44000 Hz |
| Recording modes | Pulse-code modulation (PCM) |
| Built-in microphone | Yes |
| Maximum recording time | 16 h |
| Audio formats supported | MP3, PCM |
| Internal memory | 2048 MB |
| Display type | LCD |
| Backlight color | Orange |
| Display diagonal | 2 \ |
| Display resolution | 320 x 240 pixels |
| Display size (HxV) | 40.7 x 30.5 mm |
| Output power | 270 mW |
| Loudspeaker diameter | 16 mm |
| Number of built-in speakers | 1 |
| Interface | USB |
| FM radio | No |
| Recording battery life | 1.083 h |
| Media types supported | Flash card |
| Compatible memory cards | SD, SDHC |
| File type | MOV (MPEG-4AVC/H.264) |
| Dimensions (WxDxH) | 135 x 18.1 x 63 mm |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard |
Weight and Dimensions| Depth | 18.1 mm |
|---|---|
| Width | 135 mm |
| Height | 63 mm |
| Weight | 154 g |
To Next Page
