Omron 1S Series Startup Guide

50
5.
Set up the absolute encoder (if required).
Use this function when clearing the multiple rotation data or when replacing a
Servomotor in the actual machine.
Resetting multiple rotation data
Click the Clear system Button.
The following message appears: Restart the drive to complete the operation.
Click the Yes Button.
Multiple rotation data of the encoder has been cleared.

Omron 1S Series Specifications

General

Safety Function	STO (Safe Torque Off)
Motor Capacity	50 W to 15 kW
Output Power	50 W to 15 kW
Communication Interface	EtherCAT, MECHATROLINK-II/III
Feedback	Incremental Encoder
Operating Temperature	0 to +55°C
Protection Features	Overcurrent, Overvoltage
Ambient Humidity	20% to 90% RH (non-condensing)
Installation	Panel Mount
Weight	Varies by model
Storage Temperature	-20 to 85°C