Omron 1S Series Startup Guide

91
9.
Configure the motion profile and click the Apply Button.
10
.
Click the Servo ON Button to turn ON the Servo and then click the Start Button.
Be careful because the Servomotor will move in forward and reverse directions.
11.
Data trace is now triggered, and trace results are displayed.
Each time the Servomotor moves, traced data will appear cyclically.

Omron 1S Series Specifications

General

Safety Function	STO (Safe Torque Off)
Motor Capacity	50 W to 15 kW
Output Power	50 W to 15 kW
Communication Interface	EtherCAT, MECHATROLINK-II/III
Feedback	Incremental Encoder
Operating Temperature	0 to +55°C
Protection Features	Overcurrent, Overvoltage
Ambient Humidity	20% to 90% RH (non-condensing)
Installation	Panel Mount
Weight	Varies by model
Storage Temperature	-20 to 85°C