Omron 3G3M1-A4004-ECT - Page 656

Index
(hex)
Sub-
index
(hex)
Pa-
rame-
ter No.
Function name Monitor or data range
Default
data
Set-
ting
dur-
ing
RUN
Unit
PDO
map
02 F01 1st Frequency
Reference Selec-
tion
V/f DTV
PG V/f PG DTV
SLV PGV PM SLV PM PGV
1: Analog voltage input (terminal
[AI1])
7: UP/DOWN control
10: Pattern operation
12: Pulse train input
13: Calculation result
15: EtherCAT
15 --- --- Possible
03 F02 1st RUN Com-
mand Selection
V/f DTV
PG V/f PG DTV
SLV PGV PM SLV PM PGV
1: Terminal command (FW or RV)
5: EtherCAT
5
--- --- Possible
04 F03 1st Maximum
Output Frequen-
cy
V/f DTV
PG V/f PG DTV
SLV PGV PM SLV PM PGV
5.0 to 590.0
60.0 --- Hz Possible
05 F04 1st Base Fre-
quency
V/f DTV
PG V/f PG DTV
SLV PGV PM SLV PM PGV
5.0 to 590.0
50.0 --- Hz Possible
06 F05 1st Rated Volt-
age at Base Fre-
quency
V/f DTV
PG V/f PG DTV
SLV PGV PM SLV PM PGV
80 to 240 (200 V class series)
160 to 500 (400 V class series)
200 --- V Possible
07 F06 1st Rated Volt-
age at Maximum
Output Frequen-
cy
V/f DTV
PG V/f PG DTV
SLV PGV PM SLV PM PGV
80 to 240 (200 V class series)
160 to 500 (400 V class series)
200 --- V Possible
08 F07 1st Acceleration
T
ime 1
V/f DTV
PG V/f PG DTV
SLV PGV PM SLV PM PGV
0.00 to 6,000.00
6.00
√
s Possible
09 F08 1st Deceleration
T
ime 1
0A
F09 1st Manual Tor-
que Boost Volt-
age
V/f DTV
PG V/f PG DTV
SLV PGV PM SLV PM PGV
0.0 to 20.0
Percentage with respect to 1st Rated
Voltage at Base Frequency (F05)
1.9
√
%
Possible
Appendices
A-110
M1 Series EtherCAT Type User’s Manual (I670)