EasyManua.ls Logo

Omron 3G3M1-A4004-ECT - Page 795

Omron 3G3M1-A4004-ECT
850 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Event name Breaking Transistor Error Event code 08850000 hex
Meaning An abnormal operation was detected in the braking transistor.
Source EtherCAT Master Function Mod-
ule
Source details Slave Detection tim-
ing
Continuously
Error attrib-
utes
Level Minor fault Recovery Error reset Log category System log
Effects User program Continues. Operation Motor stops.
Indicators EtherCAT NET RUN EtherCAT NET ERR EtherCAT LINK/ACT
--- --- ---
System-de-
fined varia-
bles
Variable Data type Name
None None None
Cause and
correction
Assumed cause Correction Prevention
(1) The braking resistor connec-
tion terminals are incorrectly
wired.
Check if the braking resistor is
correctly wired to P(+) and DB of
the main circuit terminals.
Check if the motor wiring is incor-
rectly connected to the DB termi-
nal.
→ If there is no incorrect wiring,
replace the inverter
.
Connect the braking resistor cor-
rectly wired to
P(+) and DB of the
main circuit terminals.
(2) The braking transistor is dam-
aged.
Check if the value of the braking
resistor is appropriate or there is
no incorrect connection.
→ If there is no problem, replace
the inverter.
None
Attached in-
formation
None
Precautions/
Remarks
None
Appendices
A-249
M1 Series EtherCAT Type User’s Manual (I670)
A-5 Sysmac Error Status Codes
A
A-5-2 Error Descriptions

Table of Contents

Related product manuals