Index
(hex)
Sub-
index
(hex)
Pa-
rame-
ter No.
Function name Monitor or data range
Default
data
Set-
ting
dur-
ing
RUN
Unit
PDO
map
63 H98 Protection/Main-
tenance Function
Mode Selection
V/f DTV
PG V/f PG DTV
SLV PGV
PM SLV PM PGV
0 to FF hex
Bit 7: Reserved
Bit 6: Braking transistor error detec-
tion
0: Disable
1: Enable
Bit 5: Detect inrush current preven-
tion resistor overheat
0: Enable
1: Disable
Bit 4: Judge main circuit capacitor life
0: Disable
1: Enable
Bit 3: Main circuit capacitor life judg-
ment selection
0: Factory default standard
1: User measurement value
standard
Bit 2 to 0: Reserved
80
√
--- Possible
64 H99 Password 2 Set-
ting / Verification
V/f DTV
PG V/f PG DTV
SLV PGV
PM SLV PM PGV
0000 to FFFF hex
0
√
--- Possible
3020 0F H114 Anti-regenerative
Control Level
V/f DTV
PG V/f PG DTV
SLV PGV
PM SLV PM PGV
0.0 to 50.0
999: Auto judgment
*1
999
√
% Possible
11 H116 Reserved Do not use. --- --- --- ---
12 H117 Reserved Do not use. --- --- --- ---
13 H118 Reserved Do not use. --- --- --- ---
14 H119 Reserved Do not use. --- --- --- ---
15 H120 Reserved Do not use. --- --- --- ---
16 H121 Reserved Do not use. --- --- --- ---
1F H130 Reserved Do not use. --- --- --- ---
20 H131 Reserved Do not use. --- --- --- ---
22 H133 Reserved Do not use. --- --- --- ---
23 H134 Reserved Do not use. --- --- --- ---
30 H147 Speed Control
Jogging Feed
Forward Gain
V/f DTV
PG V/f PG DTV
SLV PGV
PM SLV PM PGV
0.00 to 99.99
0
√
s Possible
Appendices
A-140
M1 Series EtherCAT Type User’s Manual (I670)
To Next Page
Loading...
