Unit Versions
22
CJ-series EtherCAT Slave Units Operation Manual (W541)
In the IO Table Window, right-click the Unit to check the Unit Version and select Unit Manufacturing
Information.
The following Unit Manufacturing Information Dialog Box will be displayed.
The functions that are supported depend on the unit version of the Unit. The version of CX-Programmer
that supports the functions that were added for an upgrade is also required to use those functions.
Refer to A-7 Version Information on page A-33 for the functions that are supported by each version.
Unit Versions and CX-Programmer Versions
To Next Page
Loading...
Need help?
General
