Omron CJ2 CPU UNIT - Page 65

1-23
1 Overview
CJ2 CPU Unit Hardware User’s Manual
1-3 Specifications
1
1-3-3 Function Specifications
*4 A Serial Option Board is required to use a serial port for the CJ2M-CPU3@ CPU Unit.
*5 A Serial Option Board is required to use the CJ2M-CPU3@ CPU Unit in Serial PLC Links.
*6 Supported only by CJ2H-CPU6@-EIP and CJ2M-CPU3@.
Function Description
Communications ---
Peripheral
(USB) Port
Peripheral Bus Bus for communications with various kinds of Support Software running on a
personal computer. High-speed communications are supported.
Serial Port
*4
---
Host Link (SYSWAY) Communications Host Link commands or FINS commands placed between Host Link headers
and terminators can be sent from a host computer or PT to read/write I/O mem-
ory, read/control the operating mode, and perform other operations for PLC.
No-protocol Communications I/O instructions for communications ports (such as TXD/RXD instructions) can
be used for data transfer with peripheral devices such as bar code readers and
printers.
NT Link Communications I/O memory in the PLC can be allocated and directly linked to various PT func-
tions, including status control areas, status notification areas, touch switches,
lamps, memory tables, and other objects.
Peripheral Bus Bus for communications with various kinds of Support Software running on a
personal computer. High-speed communications are supported.
Serial Gateway This gateway enables receiving and automatically converting FINS to the Com-
poWay/F.
Serial PLC Links
*5
Data is exchanged between CPU Units using serial ports without communica-
tions programming. PTs set to the 1:N NT Link protocol can be included in the
network.
EtherNet/IP Port
*6
100Base-TX/10Base-T
Protocols: TCP/IP, UDP, ARP, ICMP (ping only), BOOTP
Applications: FINS, CIP, SNTP, DNS (Client), FTP (Server)
CIP Commu-
nications
Service
Tag Data Links Programless cyclic data exchanges with the devices on the EtherNet/IP net-
work.
Message Communications Any CIP commands can be received from the devices on the EtherNet/IP net-
work.
FINS Com-
munications
Service
Message Communications Any FINS commands can be transferred with the devices on the EtherNet/IP
network.