Omron CP1E - INTRODUCTION User Manual

A
Appendix
A-4 CP1L Programming Examples
SYSMAC CP1L/CP1E Introduction Manual 131
When interrupt input 0 (CP1E: 4) (contact 0.04) turns ON, the following "interrupt
task 140 (CP1E: 4)" will be executed once. Assignment of interrupt tasks to
interrupt inputs is fixed. Interrupt input 0 (CP1E: 4) will always execute interrupt
task 140 (CP1E: 4).
SET
NG output
sensor input 1
NG output
sensor input 2
NG output
sensor input 3
Sensor input 1
Sensor input 1
Sensor input 2
Sensor input 3
0.00
0.00
0.01
0.02
Sensor input 3Sensor input 2
0.01 0.02
PASS output
Interrupt task
140
(CP1E: 4)
100.00
SET
100.02
SET
100.03
SET
100.04

Omron CP1E - INTRODUCTION Specifications

General

Brand	Omron
Model	CP1E - INTRODUCTION
Category	Controller
Language	English