Omron CP1E - INTRODUCTION

A
Appendix
A-4 CP1L Programming Examples
132 SYSMAC CP1L/CP1E Introduction Manual
■INFO
●Creating Interrupt Task Programs
1. Right-click [NewPLC1[CP1L]Offline] in the project tree. Select [Insert
Program]-[Ladder] from the pop-up menu.
[NewProgram2(Unassigned)] will be added to the bottom of the project tree.
2. Right-click [NewProgram2(Unassigned)]. Select [Properties] from the
pop-up menu.
The Program Properties dialog box will be displayed.