Omron CP1E - INTRODUCTION

A
Appendix
A-4 CP1L Programming Examples
SYSMAC CP1L/CP1E Introduction Manual 133
3. Click the General tab. Select [Interrupt Task 140 (CP1E: 4)] from the Task
type drop-down list.
o
4. Close the Program Properties dialog box.
5. Select [Section1] under [NewProgram2 (Int 140 (CP1E: 4))].
6. Input the ladder program for the interrupt.
To display the main ladder program, double-click [Section1] under
[NewProgram1(00)] in the project tree.