Omron CP1E - INTRODUCTION User Manual

A
Appendix
A-4 CP1L Programming Examples
152 SYSMAC CP1L/CP1E Introduction Manual
■Operation Overview
A bobbin winder on a spinning machine will be used for in the following example.
The rotation speed of the bobbin winder must be made variable as the thread is
wound, so that the speed at which the thread is pulled stays constant.
The target speed is achieved based on input from multiple contacts. Acceleration
and deceleration is modified by the acceleration and deceleration of an inverter.
■System Configuration
CP1L and V1000 (an OMRON inverter) are connected by RS485 for frequency and
start/stop control.
●Wiring Example
CP1L
Slow rotation
Fast rotation
Constant thread speed
Speed
Contact A
ON
Contact B
ON
Contact C
ON
Contact Z
ON
60.00Hz
55.00Hz
50.00Hz
Stooped
(W0.00)
(W0.01)
(W0.02)
(W0.15)
COMM
RDA- RDB+ SDA- SDB+ FG
Control
circuit
terminal block
(communication
terminals)
Symbol
S-
S+
R-
R+
CP1L
CP1W-CIF11/12
(RS422/485 option board)
1
CP1W-CIF11/12
2
4
5
RDA-
3
RDB+
SDA-
SDB+
FG
RS485
50m or less
V1000

Omron CP1E - INTRODUCTION Specifications

General

Brand	Omron
Model	CP1E - INTRODUCTION
Category	Controller
Language	English