A
A-5 Comparison between CP1L and CP1E
SYSMAC CP1L/CP1E Introduction Manual 177
Appendix
■PLC Setup
Item CP1L CPU Units CP1E E-type CPU Units CP1E N-type CPU Units
PLC Setup - Functions not provided in the PLC Setup
• Comms Instructions Settings in FB: None
• Inverter positioning: None
• Set time to all events: Deleted
• Startup Hold: Deleted
Force Status Hold
IOM Hold
• Scheduled Interrupt Interval: Deleted (Only 0.1ms)
• Changing functions in the PLC Setup from CP1L
• Detect Low Battery
Default: Do not detect (CP1L: Detect)
• Watch Cycle Time
Maximum 1000ms (CP1L: 32000ms)
• Constant Cycle Time
Maximum 1000ms (CP1Lt: 4000ms)
To Next Page
Loading...
Need help?
General
