Omron CP1E - INTRODUCTION

4-5 Inputting Programs
4
4
SYSMAC CP1L/CP1E Introduction Manual 57
Creating Programs
■Inputting OR Circuits
1. Place the cursor on the program. Press the [Enter] key.
A space for inserting an OR circuit will be created.
2. Press the [W] key.
"OR 0.05" will be displayed.
3. Press the [Enter] key.
"Bit (1/1)" will be displayed and "0.05" will be displayed in reverse video.
4. Input address "W0". Press the [Enter] key.
"W0" is entered. The Comment dialog box will be displayed.