Omron E5*C Series User Manual

4 Basic Operation
4 - 48
E5@C-T Digital Temperature Controllers User’s Manual (H185)
z Related Parameters
Reset Operation = Fixed SP Operation
1 Press the M Key several times in the Operation Level to dis-
play the Run/Reset parameter.
Adjustment Level
2 Press the D Key to select rst.
The default is rst.
* Fixed SP Mode is entered (the fsp operation display will light).
The following procedure sets the set point to 200°C.
Operating Procedure
1 Select the Process Value/Set Point 1/2 parameter in the Opera-
tion Level.
Adjustment Level
2 Press the U or D Key to set the SP to 200.
The default is 0.
Parameter
name
Display Setting range Unit Level
SP Mode spmd psp: Program SP Mode
fsp: Fixed SP Mode
---
Adjustment Level
Fixed SP fsp SP lower limit to SP upper limit EU
Reset Operation rtsm stop: Stop control
fsp: Fixed SP operation
---
Initial Setting Level
rst
r-r
Run/Reset
rst
r-r
0
25
Process Value/Set Point
(1) (2)
200
25

Omron E5*C Series Specifications

General

Brand	Omron
Model	E5*C Series
Category	Controller
Language	English