Omron E5*C Series User Manual

4 Basic Operation
4 - 8
E5@C-T Digital Temperature Controllers User’s Manual (H185)
After you have set the icpt (Initial Setting/Communications Protect) parameter to 0 (enable moving
to Advanced Function Setting Level), select amov (Move to Advanced Function Setting Level) in the
Initial Setting Level.
z Moving to the Advanced Function Setting Level
z Moving from the Advanced Function Setting Level to the Operation Level
Moving to the Advanced Function Setting Level after Clearing
Protection
1 Press the O Key for at least 3 seconds in the Operation Level.
The No. 1 display will flash when the key is pressed for 1 s or
longer. The display will change from the Operation Level to the
Initial Setting Level.
Operation Level
2 Press the M Key several times in the Initial Setting Level to
display amoV (Move to Advanced Function Setting Level).
Initial Setting Level
3 Press the D and U Keys at the Move to Advanced Function
Setting Level parameter and then enter -169.
* You can hold the U (Up) or D (Down) Key to increment or decrement
the set value quickly.
Initial Setting Level
4 Press M Key once or wait for 2 seconds or longer without
doing anything.
The display will change to the Advanced Function Setting Level.
Advanced Function Setting
Level
1 Press the O Key for at least 1 second in the Advanced
Function Setting Level.
The display will change from the Advanced Function Setting Level
to the Initial Setting Level.
Advanced Function Setting
Level
2 Press the O Key for at least 1 second in the Initial Setting
Level.
Initial Setting Level
The display will change from the Initial Setting Level to the
Operation Level.
Operation Level
0
25
5
in-t
Input Type
0
amov
Move to Advanced
Function Setting
Level
-169
amov
Move to Advanced
Function Setting Level
−169: Password to
move to Advanced
Function Setting Level
off
init
Parameter
Initialization
off
init
5
in-t
Input Type
0
25
PV/SP

Omron E5*C Series Specifications

General

Brand	Omron
Model	E5*C Series
Category	Controller
Language	English