XI
03 May 2005 The following changes were made.
Page 4-10: Information added on direct/reverse operation, alarms, input shift, SP ramp, and
PID.
Page 5-6: “0.0000” corrected to “0.000” and “210.0
°C” corrected to “190.0°C” in text and graph.
Pages 5-13 and 8-32: Setting range changed from “10% to 110% of setting range” to “
−19999
to 99999” in table, and related note removed.
Page 5-26: Condition B changed to “At power on” for standby sequence restart.
Page 8-37: Note added.
Revision code Date Pages and changes
To Next Page
Loading...
