5.7 Using event input
5-31
Functions and
Operations
● SP mode • This function is only effective when the control mode is control with
remote SP.
• When the event input is ON, the remote SP (RSP) is used as the SP
and the "RSP" operation indicator lights up. When the event input is
OFF, the local SP (LSP) is used as the SP. The content of the event
input is reflected in "SP mode" (Adjustment level).
• This setting data is an operation command that is particular to a
single channel.
• Operation is as follows based on the event input ON/OFF state.
∗: 1 to 6
Event input Description
OFF Local SP mode
ON Remote SP mode
Symbol
Setting data
name
Level
(Display 3)
Use
ev.
∗
Event input 1 to 6
assignment
Control initial
setting 2 (l.2)
Specify event
input
To Next Page
Loading...
