35
F210
Setup Manual
SECTION 3
Lenses, Lighting, and Memory Cards
SECTION 3
Memory Cards
Memory Cards
Use a Memory Card to back up data such as settings and image data or increase the number of scenes
when you are using the Scene Group function.Data from the Controller can be backed up in the
computer just by inserting the Memory Card into the computer and copying the desired data.The
following procedures also apply to the Memory Card containing the Application Software.
A filler card with no memory is inserted into the Controller’s Memory Card slot before the Controller is shipped.Remove this
filler card and install a Memory Card to use the Memory Card functions.If Memory Cards are not being used, leave the filler
card in place to prevent dust or dirt from entering the Memory Card slot.
Installing a Memory Card
1. Lift the card lock of the memory card slot.
Do not force it. Just lift gently.
2. Insert a memory card into the slot.
3. Push the card lock to secure the memory card.
Recommended Model
Manufacturer Item Capacity
OMRON Corporation F160-N64S(S) 64 MB
OMRON Corporation QM300-N128S 128 MB
F210setUP.book35ページ2003年1月28日 火曜日 午前11時6分