52
SECTION 5
Q&A
F210
Setup Manual
SECTION 5
Troubleshooting and Maintenance
Cabling Errors
Questions Answers
A recommended OMRON
RS-232C cable is not being
used.
One of the following OMRON cables can be used. Select a cable that works with
the device being connected.
Connecting to a PC/AT or compatible computer (9-pin connector)
• XW2Z-200S-V (2 m)
• XW2Z-500S-V (5 m)
Connecting to a SYSMAC device (9-pin connector)
• XW2Z-200T (2 m)
• XW2Z-500T (5 m)
Can a commercially
available cable be used
instead of the R150-VM
Monitor Cable?
Yes, as long as it’s a pin jack cable (with a yellow connector) for video signal
connection.
F210setUP.book52ページ2003年1月28日 火曜日 午前11時6分