Omron NE1A Series - Page 61

62
Remote I/O Allocations Section 4-3
Setting Example 1: Settings from Network Configurator (Unit Version 1.0 or
Later)
The following table shows the remote I/O area arrangement when the above
settings are made.
Setting Example 2: Settings from Network Configurator (Unit Version 1.0 or
Later)
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 General Status (1 byte)
1 Local Input Status 1 (1 byte)
2 Local Input Status 2 (1 byte)
3 Local Output Status (1 byte)
4 Test Output/Muting Lamp Status (1 byte)
5 Byte A (1 byte)
6 Word B (2 bytes)
7