Omron NE1A Series - Page 62

63
Remote I/O Allocations Section 4-3
The following table shows the remote I/O area arrangement when the above
settings are made.
Setting Example 3: Settings from Network Configurator (Controllers with Unit
Version 1.0 or Later)
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Local Input Status 1 (1 byte)
1 Local Input Status 2 (1 byte)
2 Local Output Status (1 byte)
3 Bool C (1 byte)
4 Dword D (4 bytes)
5
6
7
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Local Input Status 1 (1 byte)
1 Local Input Status 3 (1 byte)
2 Local Input Status 5 (1 byte)
3 Local Output Status (1 byte)
4 Local Input Monitor 1 (1 byte)
5 Local Input Monitor 3 (1 byte)
6 Local Input Monitor 5 (1 byte)
7 Local Output Monitor (1 byte)
8 Bool E (1 byte)
9 Byte F (1 byte)