7 - 33
7 Programming
NX-series Safety Control Unit User’s Manual (Z930)
7-5 Programming Operations
7
7-5-2 Registering POUs
A dialog box to check the CRC data is displayed.
3 Check the CRC data, and click the OK Button.
The program is imported and added to the project.
Precautions for Correct Use
After a function block is imported, the Safety CPU Unit will be in an unvalidated state. Always
execute safety validation again.
You can check the CRC data on the Change Tracking Tab Page or Properties Dialog Box.
You can import programs with Sysmac Studio version 1.17 or higher.
To Next Page
Loading...
