Omron OMNUC G5 R88D-KT50F

9-18
9-4 Setting the Mode
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
9
Operation
Encoder Position Error
External Encoder Position Error
Hybrid Error
Lower (L)
Higher (H)
Encoder position error [encoder unit]
Press to switch between Lower (L) and Higher (H).
Lower (L)
Higher (H)
External encoder error [external encoder unit]
Press to switch between Lower (L) and Higher (H).
Lower (L)
Higher (H)
Hybrid error [command unit]
Press to switch between Lower (L) and Higher (H).