Omron SYSDRIVE 3G3IV

Appendix A  7
&
Inverter model 3G3IV-  -  380 to 460 V
B430KB422KB418KB416KB411KB4750B4550
Stall prevention Stall prevention at acceleration/deceleration and constant
speed operation
Ground fault Provided by electronic circuit
Power charge indication Charge lamp stays ON until bus voltage drops below 50 V.
Environmental
d
i
t
i
Location Indoor (protected from corrosive gases and dust)
conditions
Ambient temperature Enclosed type, totally-enclosed type:
+14° to 104°F(--10° to +40°C)
Open chassis type: +14° to 122°F(--10° to +50°C) (not
frozen) (see note 4)
Storage temperature
(See Note 5)
--4° to 140°F(--20° to +60°C)
Humidity 90% RH (non-condensing)
Vibration 9.81 m/s
2
1Glessthan20Hz,upto0.2Gat20to50Hz
Note 1. Our standard 4-pole motor is used for max applicable motor output.
2. Application of variable torque rating requires adjustment of 4th digit of Sn-14: from 0 to 1 (0

to 1

)
3. Approx. 700 V when input voltage set value (Cn-01) is less than 400.0 V approx. 800 V when it
exceeds 400.0 V.
4. Up to 122°F(50°C) allowed when front cover is removed (open chassis type).
5. Temperature during shipping (for short period).