Omron SYSMAC CP2E-E D Series

7-25
7 PLC Setup
CP2E CPU Unit Software User’s Manual(W614)
7-2 PLC Setup Settings
7
7-2-12 Built-in Ethernet Settings
8 FINS/TCP Connection Setting
FINS/TCP Connection No.1
8-1 FINS/TCP Server/Client Mode Server Server When power is turned ON or
when Ethernet is reset
Client
8-2 Connection IP Address 0.0.0.0 0.0.0.0 When power is turned ON or
when Ethernet is reset
:
255.255.255.255
8-3 Auto FINS Node Allocation Address
(Only valid for FINS/TCP Server
mode)
251
(Default value: 0)
0 (251) When power is turned ON or
when Ethernet is reset
:
253
8-4 Keep-alive Disable Disable When power is turned ON or
when Ethernet is reset
Enable
FINS/TCP Connection No.2
8-5 FINS/TCP Server/Client Mode Server Server When power is turned ON or
when Ethernet is reset
Client
8-6 Connection IP Address 0.0.0.0 0.0.0.0 When power is turned ON or
when Ethernet is reset
:
255.255.255.255
8-7 Auto FINS Node Allocation Address
(Only valid for FINS/TCP Server
mode)
252
(Default value: 0)
0 (252) When power is turned ON or
when Ethernet is reset
:
253
8-8 Keep-alive Disable Disable When power is turned ON or
when Ethernet is reset
Enable
FINS/TCP Connection No.3
8-9 FINS/TCP Server/Client Mode Server Server When power is turned ON or
when Ethernet is reset
Client
8-10 Connection IP Address 0.0.0.0 0.0.0.0 When power is turned ON or
when Ethernet is reset
:
255.255.255.255
8-11 Auto FINS Node Allocation Address
(Only valid for FINS/TCP Server
mode)
253
(Default value: 0)
0 (253) When power is turned ON or
when Ethernet is reset
:
253
8-12 Keep-alive Disable Disable When power is turned ON or
when Ethernet is reset
Enable
Name Default Possible Settings
When Setting is read by
CPU Unit