Omron SYSMAC CP2E-E D Series User Manual

7 PLC Setup
7-26
CP2E CPU Unit Software User’s Manual(W614)
FINS/UDP Settings
Name Default Possible Settings
When Setting is read by
CPU Unit
9 FINS/UDP Port Number Mode 9600 Default (9600) When power is turned ON or
when Ethernet is reset
User
FINS/UDP Port Number (User) 9600
(Default value: 0)
0 (9600) When power is turned ON or
when Ethernet is reset
1
:
65,535
10 IP Address Conversion Method Auto Method Auto Method When power is turned ON or
when Ethernet is reset
Auto Method (Static)
Combined Method
IP Address Table Reference
Method
11 FINS/UDP Destination IP Mode Dynamically Dynamically When power is turned ON or
when Ethernet is reset
Static
DNS Server Settings
Name Default Possible Settings
When Setting is read by
CPU Unit
12 DNS Server IP Address 0.0.0.0 0.0.0.0 When power is turned ON or
when Ethernet is reset
:
255.255.255.255
13 DNS Port Number 53
(Default value: 0)
0 (53) When power is turned ON or
when Ethernet is reset
1
:
65,535
14 Retry Time 10s
(Default value: 0)
0 (10s) When power is turned ON or
when Ethernet is reset
1s
:
65,535s
SNTP Server
Name Default Possible Settings
When setting is read by
CPU Unit
15 Auto Adjust Time Mode Disable Disable When power is turned ON or
when Ethernet is reset
Enable
15-1 Auto Adjust Time 0h0m0s 0h0m0s When power is turned ON or
when Ethernet is reset
:
23h59m59s
15-2 SNTP Server Specify Method IP Address IP Address When power is turned ON or
when Ethernet is reset
Host Name
SNTP Server IP Address 0.0.0.0 0.0.0.0 When power is turned ON or
when Ethernet is reset
:
255.255.255.255
SNTP Server Host Name (46 ASCII) Blank Any String When power is turned ON or
when Ethernet is reset

Omron SYSMAC CP2E-E D Series Specifications

General

Brand	Omron
Model	SYSMAC CP2E-E D Series
Category	Computer Hardware
Language	English