7
1 Safety Information
This machine can be safely used with the following materials:
Plastics
•
Acrylonitrile Butadiene Styrene (ABS)
•
Nylon (Polyamide, PA, etc.)
•
Polyethylene (PE)
•
High-Density Polyethylene (HDPE, PEHD,
etc.)
•
Biaxially-oriented Polyethylene
Terephthalate (BoPET, Mylar, Polyester,
etc.)
•
Polyethylene Terephthalate Glycol (PETG,
PET-G, etc.)
•
Polyimide (PI, Kapton, etc.)
•
Polymethyl Methacrylate (PMMA, Acrylic,
Plexiglass, Lucite, etc.)
•
Polyoxymethylene (POM, Acetal, Delrin,
etc.)
•
Polypropylene (PP, etc.)
•
Styrene
Other
•
Cardboard
•
Ceramics, including Dishes, Tile, etc.
•
Glass
•
Leather
•
Paper & Paperboard
•
Rubber
•
Stone, including Marble, Granite, etc.
•
Textiles, including Cotton, Suede, Felt,
Hemp, etc.
•
Wood, including Cork, MDF, Plywood,
Balsa, Birch, Cherry, Oak, Poplar, etc.
See
§6.4
Instructions for Specific Materials on Page 73 for the recommended parameters for
the most commonly engraved materials.
To Next Page
