Omtech POLAR+ - Rotary Operation; Installing Your Rotary Axis

65
6 Operation
6.3 Rotary Operation
The Polar+ comes with two separate 4-wheel rotary axis devices
to engrave spherical and cylindrical surfaces. Use Rotary Axis 1
for larger items and use Rotary Axis 2 for smaller ones.
6.3.1 Installing Your Rotary Axis
1. Remove the debris tray and the honeycomb
workbed. Set them aside where they will not
be damaged or fall over.
2. Cover the exposed area of your table with a
non-reflective plank, preferably an MDF that
fits the space.
Warning! Failure to place the panel in a position that totally covers your
table may cause a fire hazard.