23
3.5 Laser Head
3 Components
A 3rd Mirror
This fixed mirror transfers the laser from the 2nd mirror at the end of
the X-axis rail downward to the focus lens.
B Focus Lens
This 15.5 mm lens directs and focuses the laser beam to its point of
contact with your material.
C Air Assist
This tube provides the pressurized air from its compressor to kill
sparks and minimize dust and gases.
D Laser Beam
The engraving laser itself is invisible but highly dangerous. Avoid any
direct exposure to your skin or eyes.
A
C
B
D
To Next Page
Loading...
