15
3.1 Top View
3 Components
B HE
D
K
I
J
O
F
N
P
M
C
A LG
A Rotary Plug
This small aviation plug connects to the provided rotary axes to
provide them with power and command signals.
B Wifi Card
The 2.4 GHz wireless terminal device located behind the central part
of the rear panel provides wifi connectivity for your engraver.
C Laser Power Supply
This device transforms standard electricity into the extremely high
voltage charge necessary for the laser tube.
D Y-Axis Rail
The Y-axis rail supports the movement of the laser tube and the X-axis
rail up and down the workbed.
E Rotary Switch
This switch directs the mainboard and power supply to provide
power and commands to the Y-axis rail (Standard) or to a rotary axis
(Rotary) connected to the rear aviation plug.
F Laser Tube
This CO
₂
-filled glass tube is mounted beside the X-axis rail within a
protective housing. They normally move together along the Y-axis
rail. The laser’s connection to its power supply is extremely high
voltage and extremely dangerous.
G Ammeter This digital display provides the current of the laser in milliamps (mA).
H Air Assist
This small air compressor directs pressurized air through a narrow
tube to the laser head. To minimize noise, it only activates with the
laser.
To Next Page
Loading...
