ONE Technologies
- 102 -
If you chose “Y” for the whole space, partitioning is finished now.
You have to format the new partition now. See 7. for formatting.
If you chose “N” you have to go back to “Create Extended DOS
partition”. The rest of the free space will be activated as extended
partition. Then you can “Create Logical DOS Drive(s) in the Extended
DOS Partition” to make the rest of the hard drive available!
7. When leaving “FDISK” you will be asked to reboot your computer.
After the system has been loaded again, you have to format the new
drive(s). The easiest way is to use the Windows-Format-Dialog.
Open “my computer” and click with the right mouse button on the
new disk drive. In the appearing pop-up menu choose “format”.
Please notice that “quick format” is not possible when formatting the
drive for the first time!
ONE Technologies is not responsible for loss of data!
To Next Page
Loading...