ONE Technologies
- 20 -
Now the device manager shows the new drive. Like any hard drive
(IDE, SCSI, internal or external) it must be configured before you
can use it! As you may recognize, the drive is shown in the device
manager, but not in the explorer or in “my computer”. To get it to
mount, you have to create one or more partitions on the disk and
format them afterwards. Under Windows 98SE und ME you can use
the program „FDISK“ , under Windows 2000 or XP use the “disk
management” (Computer Management). As an alternative to
„FDISK“ you can also use the “Shining Utilities” from the
ONE_ToolsCD, which allows configuring of your disk with a
graphical interface. Detailed explanations can be found in the
chapter „Hard Disk Tools“.
To Next Page
Loading...