Onkyo R-N855 User Manual

En- 10
Connect the Speakers
a Speaker cable
Refer to the illustration to connect your own speakers.
After inserting the speaker cables, tighten the terminals
firmly by turning to the right.
You can also connect a subwoofer with a built-in amplifier
to boost bass playback even more. When connecting,
make sure you connect to the Rch of the LINE OUT jacks
using a subwoofer cable. Settings need to be changed
when connecting a subwoofer. (P31 “LINE OUT/SW”)
Also make sure the exposed wires of the speakers do not
stick out of the speaker terminals when connecting. If the
exposed wires of the speakers touch the rear panel or
the i and s wires touch each other, the protection circuit
may be activated and the power may turn off.
2
a
a
1
3
SN29402579_R-N855_En_1608xx.book 10 ページ ２０１６年９月１３日 火曜日 午前９時１２分

Onkyo R-N855 Specifications

General

Receiver type	stereo
Frequency range	5 - 60000 Hz
Input sensitivity	200 mV
Audio output channels	2.0 channels
Signal-to-Noise Ratio (SNR)	106 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (20-20KHz@8 Ohm)	- W
Audio (L/R) in	2
Digital audio optical in	-
Audio (L/R) out	1
Headphone connectivity	3.5 mm
Product color	Black
Speakers connectivity type	Banana connector
FM band range	87.5 - 108 MHz
Supported radio bands	DAB, DAB+, FM
Preset stations quantity	40
AC input voltage	80-230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	60 W
Package weight	8000 g
Cables included	AC

Weight and Dimensions

Depth	283.2 mm
Width	275 mm
Height	87.7 mm
Weight	6100 g