EasyManuals Logo
Home>Onkyo>Receiver>R-N855

Onkyo R-N855 User Manual

Onkyo R-N855
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
En-
31
and press ENTER (d).
LINE OUT/SW
Change the settings according to the devices connected
to the LINE OUT jacks on this unit. When changing this
setting, perform without devices connected to the LINE
OUT jacks.
Select the item with / (c) on the remote controller
and press ENTER (d).
“LINE OUT” (Default Value) : When connecting recording
devices, such as a cassette tape deck
“SW PREOUT” : When connecting a subwoofer with
built-in power amplifier
System Info
The MAC address of this unit and the current firmware
version will be displayed.
Select “MAC address” or “Firmware” with / (a) on the
remote controller.
Factory Reset
Reset the settings of this unit to the status at the time of
shipment. We recommend that you take a note of the
settings you have changed before going ahead with a
factory reset. To reset, select “Reset Start” with / (a)
on the remote controller and press ENTER (d). Press
ENTER (d) again to start the reset. The unit will be
placed on standby automatically when initializing is
completed.
Update
“Update” is not displayed if there are no firmware
updates.
via Network
Press ENTER (d) to select when you want to update the
firmware via network.
via USB
Press ENTER (d) to select when you want to update the
firmware via USB.
SN29402579_R-N855_En_1608xx.book 31 ージ 016年9月13日 火曜日 午前9時12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo R-N855 and is the answer not in the manual?

Onkyo R-N855 Specifications

General IconGeneral
Receiver typestereo
Frequency range5 - 60000 Hz
Input sensitivity200 mV
Audio output channels2.0 channels
Signal-to-Noise Ratio (SNR)106 dB
Total Harmonic Distortion (THD)0.08 %
Power output per channel (20-20KHz@8 Ohm)- W
Audio (L/R) in2
Digital audio optical in-
Audio (L/R) out1
Headphone connectivity3.5 mm
Product colorBlack
Speakers connectivity typeBanana connector
FM band range87.5 - 108 MHz
Supported radio bandsDAB, DAB+, FM
Preset stations quantity40
AC input voltage80-230 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.2 W
Power consumption (typical)60 W
Package weight8000 g
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth283.2 mm
Width275 mm
Height87.7 mm
Weight6100 g

Related product manuals