Onkyo R-N855 User Manual

En- 27
Using the Alarm to Start Play
At the set time, the unit switches on and starts play of the
desired source. You can set two different timers, “TIMER
1” and “TIMER 2”. Make sure that the clock on this unit is
set correctly. You cannot use the timers if the clock has
not been set.
1. Press TIMER (b).
To set “TIMER 1”, proceed to step 2. To set “TIMER 2”,
press TIMER (b) once more.
2. Press ENTER (d) when “Timer Set” is displayed.
3. Press / (c) to select the source to use for timer
play, then press ENTER (d).
0 The sources you can select are “CD”, “MD” and
“TUNER”.
To select “CD” or “MD”, you first need to go to the
settings menu and set “Option” - “Selector Name” to
set an input for a jack to “CD” or “MD”. If “CD” or
“MD” is not set for an input, nothing is output when
the timer starts.
To select “TUNER”, you first need to have
registered a station in a preset channel.
4. If you have selected “TUNER”, press / (c) to
select a preset number and press ENTER (d).
5. Press / (c) to select “EVERY” or “ONCE” and
press ENTER (d).
If you select “EVERY”, select days of the week from
amongst “EVERYDAY”, “SUNDAY”, “MONDAY”,
“TUESDAY”, “WEDNESDAY”, “THURSDAY”,
“FRIDAY”, “SATURDAY”, “MON-FRI”, “TUE-SAT”, and
“SAT-SUN” and press ENTER (d).
If you select “ONCE”, select a day of the week from
amongst “SUNDAY”, “MONDAY”, “TUESDAY”,
“WEDNESDAY”, “THURSDAY”, “FRIDAY”, or
“SATURDAY” and press ENTER (d).
6. Press / (c) to set the start time for the alarm and
press ENTER (d).
Next set the hour and minutes for the start time.
7. Press / (c) to set the end time for the alarm and
press ENTER (d).
Next set the hour and minutes for the end time.
8. Press / (c) to set the volume (00 to 50) for the
alarm and press ENTER (d).
9. The TIMER indicator lights when the settings are
complete, and the content you set is displayed on the
display.
10.Press Í (a) to switch the unit to standby.
Check whether the alarm setting is On or Off : When
the TIMER indicator is on, the alarm is on. The alarm is
off if the indicator is off.
Turning the alarm setting On or Off : If the alarm is
already set, you can turn the function on or off.
1. Press TIMER (b).
2. “TIMER 1” is displayed. To modify “TIMER 1”, proceed
to step 3. To modify “TIMER 2”, press TIMER (b) once
more.
3. To turn off, press ENTER (d) when “Timer Off” is
displayed.
0 To turn on, press ENTER (d) when “Timer On” is
displayed.
0 Press / (c) to select “Timer Call”, then press
ENTER (d) to check the content you set.
4. Press Í (a) to switch the unit to standby.
a
b
c
d
Timer1 Set
SN29402579_R-N855_En_1608xx.book 27 ページ ２０１６年９月１３日 火曜日 午前９時１２分

Onkyo R-N855 Specifications

General

Receiver type	stereo
Frequency range	5 - 60000 Hz
Input sensitivity	200 mV
Audio output channels	2.0 channels
Signal-to-Noise Ratio (SNR)	106 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (20-20KHz@8 Ohm)	- W
Audio (L/R) in	2
Digital audio optical in	-
Audio (L/R) out	1
Headphone connectivity	3.5 mm
Product color	Black
Speakers connectivity type	Banana connector
FM band range	87.5 - 108 MHz
Supported radio bands	DAB, DAB+, FM
Preset stations quantity	40
AC input voltage	80-230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	60 W
Package weight	8000 g
Cables included	AC

Weight and Dimensions

Depth	283.2 mm
Width	275 mm
Height	87.7 mm
Weight	6100 g