Onkyo R-N855 User Manual

En- 14
USB Storage Device/HDD Playback
Basic operations
You can play music files by connecting a USB storage
device or HDD (hard disk drive) to the USB port on the
front or rear of the unit.
0 The USB port on the front supports a maximum 5 V/
0.5 A power supply. If the HDD requires more than
this, connect to the USB port on the rear of the unit
(maximum 5 V/1 A).
1. Turn the unit on.
2. Press USB to select “USB (F)” (USB port on the front
panel) or “USB (R)” (USB port on the rear panel).
3. Plug your USB storage device or HDD into the USB
port on the front or rear.
OR
4. Press ENTER (e) after reading is complete.
5. Select the folder or music file with / (c) on the
remote controller and press ENTER (e). To return to
the previous display, press (f).
6. Use play buttons (b) to stop play or choose tracks to
play.
0 The display of album name and artist name is
supported with MP3/WMA/Apple Lossless/FLAC/AAC/
DSD (DSF only) format music files.
0 Characters that cannot be displayed by this unit
appear as “¢”.
0 The USB port of this unit conforms with the USB 2.0
standard. The transfer speed may be insufficient for
some content you play, which may cause some
interruption in sound.
Repeat play
1. Repeatedly press REPEAT (d) during play to display
or on the display.
: Repeat play of the selected individual track.
: Repeat play of all tracks within a folder.
To cancel repeat play, press REPEAT (d) several times
until the icons disappear.
Shuffle Play
1. Press SHUFFLE/RANDOM (a) during play to display
on the display.
: Play tracks in a folder randomly.
To cancel shuffle play, press SHUFFLE/RANDOM (a)
to disappear the icon.
a
c
f
e
b
d
USB ( F )
SN29402579_R-N855_En_1608xx.book 14 ページ ２０１６年９月１３日 火曜日 午前９時１２分

Onkyo R-N855 Specifications

General

Receiver type	stereo
Frequency range	5 - 60000 Hz
Input sensitivity	200 mV
Audio output channels	2.0 channels
Signal-to-Noise Ratio (SNR)	106 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (20-20KHz@8 Ohm)	- W
Audio (L/R) in	2
Digital audio optical in	-
Audio (L/R) out	1
Headphone connectivity	3.5 mm
Product color	Black
Speakers connectivity type	Banana connector
FM band range	87.5 - 108 MHz
Supported radio bands	DAB, DAB+, FM
Preset stations quantity	40
AC input voltage	80-230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	60 W
Package weight	8000 g
Cables included	AC

Weight and Dimensions

Depth	283.2 mm
Width	275 mm
Height	87.7 mm
Weight	6100 g