To Next PageTo Next Page
Need help?Do you have a question about the Onkyo R-N855 and is the answer not in the manual?
General| Receiver type | stereo |
|---|---|
| Frequency range | 5 - 60000 Hz |
| Input sensitivity | 200 mV |
| Audio output channels | 2.0 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| Audio (L/R) in | 2 |
| Digital audio optical in | - |
| Audio (L/R) out | 1 |
| Headphone connectivity | 3.5 mm |
| Product color | Black |
| Speakers connectivity type | Banana connector |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | DAB, DAB+, FM |
| Preset stations quantity | 40 |
| AC input voltage | 80-230 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 60 W |
| Package weight | 8000 g |
| Cables included | AC |
Weight and Dimensions| Depth | 283.2 mm |
|---|---|
| Width | 275 mm |
| Height | 87.7 mm |
| Weight | 6100 g |
Critical safety alerts, handling instructions, and warnings for proper operation.
Guidelines on recording copyright, power, care, and handling to prevent damage.
Instructions for connecting passive speakers and optional subwoofers.
Guide for connecting antennas and the power cord for network and operation.
Steps to connect the unit to a wireless network using various methods.
How to set the clock for alarm and other time-based functions.
Playing music files from USB storage devices and HDDs, including repeat and shuffle.
Listening to online radio stations and managing presets via the Tuneln service.
How to stream music from Spotify using the Connect feature.
How to tune FM stations automatically, manually, and use RDS text features.
How to scan, tune, and display information for DAB radio stations.
Instructions for saving favorite stations and recalling them later.
Steps to connect a Bluetooth-enabled device to the receiver.
How to play music and control volume wirelessly via Bluetooth.
Details on using digital optical, coaxial, and analog audio cables for input.
Steps to select input and start playback from connected external sources.
Setting up Windows Media Player for media sharing and remote control.
Steps to select and play music files from network servers.
Step-by-step guide to configure start/end times, source, and recurrence for timers.
How to check the current alarm status and toggle it on or off.
Method for entering text for passwords, names, and other inputs.
How to adjust bass, treble, balance, PM Bass, and Direct mode for optimal audio.
Configure network connection types, IP settings, and device naming.
Manage Bluetooth pairing, input switching, and adjust tuner settings.
View system info, reset unit, and update firmware via network or USB.
Steps to update firmware using an internet connection.
Steps to update firmware using a USB storage device.
Basic steps like power cycling, resetting, and checking connections.
Resolving problems with no sound, distorted audio, display, and Wi-Fi connectivity.
Solutions for interrupted playback, poor FM reception, and USB/HDD issues.
Guides for network connection errors and Bluetooth device issues.
Technical details on output power, impedance, frequency response, and tuning ranges.
Technical details on network standards, Bluetooth version, and frequency bands.
