En-
8
Remote Controller
1. Í button : Turns the unit on or into standby mode.
2. TIMER button : Used to set the alarm.
3. SLEEP button : Set the sleep timer. When the time set
(30, 60, or 90 minutes) has elapsed, the unit switches
to standby. If SLEEP button is pressed after setting,
the time remaining until sleep is displayed.
4. INPUT SELECTOR button : Switches the input to be
played.
5. SHUFFLE/RANDOM button : Set shuffle play.
6. Play buttons:
1 : Start play.
; : Pause play.
∫ : Stop playback.
: : Move to the track before the one being played.
9 : Move to the next track.
0 6 and 5 are not used.
0 Depending on the input, the operation may not start.
7. TONE button : Adjust the sound quality.
8. Cursors, ENTER button : Select the item with the
cursors and press ENTER to confirm.
9. MENU button : Displays the setup menu.
10.
VOLUME button : Adjust the volume. Adjust between
0 and 50.
11.
DIRECT button : This enables the Direct function that
shuts down processing that affects sound quality so
sound closer to the original is reproduced. Press again
to cancel.
12.
Number buttons : Use to directly input the frequency of
stations when tuning.
13.
DISPLAY button : Switches the information on the
display.
14.
CLOCK CALL button : Used to set the time.
15.
REPEAT button : Set repeat play.
16.
MEMORY button : Used to register favorite radio
stations.
17.
RETURN ( ) button : Returns the display to the
previous state.
18.
MUTING button : Temporarily mutes audio. Press
again to cancel muting.
19.
CLR button : Used when entering text, etc.
20.
DIMMER button : Adjust the brightness of the display
in three steps.
SN29402579_R-N855_En_1608xx.book 8 ページ ２０１６年９月１３日 火曜日 午前９時１２分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
