User Manual
2. Specify the Recipient Email Address to send this email to and the Subject of the email. For
multiple recipients you can enter comma separated addresses
3. Edit the Email Text message to send and click Save New Action
An SMS alert can also be sent via an SMTP (email) gateway. Enter the Recipient Email Address in the
format specified by the gateway provider (e.g. for T-Mobile it is phonenumber @tmomail.net)
6.3.2 Send SMS
An SMS alert can only be sent if there is an internal cellular modem.
1. Click on Send SMS as the Add Trigger Action. Enter a unique Action Name and set the Action
Delay Time
2. Specify the Phone number that the SMS will be sent to in international format (without the +)
3. Edit the Message Text to send and click Save New Action
NOTE SMS alerts can also be sent via a SMTP SMS gateway as described above.
6.3.3 Perform RPC Action
1. Click on Perform RPC Action as the Add Trigger Action. Enter a unique Action Name and set
the Action Delay Time
2. Select a power Outlet and specify the Action to perform (power on, off, or cycle)
3. Click Save New Action