Chapter 7: Power, Environmental & Digital I/O
154
3. Select the Serial & Network > RPC Connections menu. This displays the RPC connections that
have already been configured
4. Click Add RPC
5. Connected Via presents a list of serial ports and network Host connections that you have set up
with device type RPC (but have yet to connect to a specific RPC device):
• If you select Connect Via for a Network RPC connection, enter the Host Name/Description
that you set up for that connection as the Name and Description for the power device
• If you select Connect Via a Serial connection, enter a Name and Description for the power
device
6. Select the appropriate RPC Type for the PDU (or IPMI) being connected:
• If you are connecting to the RPC via the network, you will be presented with the IPMI protocol
options and the SNMP RPC Types supported by the embedded Network UPS Tools
To Next Page
