Chapter 6: Alerts, Auto-Response & Logging
146
2. In the SMTP Server field enter the IP address of the outgoing mail Server
3. If this mail server uses a Secure Connection, specify its type. You may also specify the IP port to
use for SMTP. The default SMTP Port is 25.
4. Enter a Sender email address which appears as the from address in all email notifications sent
from this console server.
5. Enter a Username and Password if the SMTP server requires authentication
6. Specify the Subject Line for the email
7. Click Apply to activate SMTP
6.5.2 Send SMS alerts
You can use email-to-SMS services to send SMS alert notifications to mobile devices. Almost all mobile
phone carriers provide an SMS gateway service that forwards email to mobile phones on their networks.
There’s also a wide selection of SMS gateway aggregators who provide email to SMS forwarding to
phones on any carriers.
Alternately if your console server has an embedded or externally attached cellular modem, you have the
option to send the SMS directly over the carrier connection.
SMS via Email Gateway
To use SMTP SMS, an administrator must configure a valid SMTP server for sending the email:
To Next Page
Loading...
Need help?
General
