Chapter 6: Alerts, Auto-Response & Logging
148
1. Select Cellular Modem in the SMS Settings field
2. You may need to enter the phone number of the carrier’s SMS Message Centre if advised by your
carrier or Support
3. Click Apply Settings to activate SMS-SMTP connection
6.5.3 Send SNMP Trap alerts
An administrator can configure the Simple Network Management Protocol (SNMP) agent that resides on
the console server to send SNMP trap alerts to an NMS management application:
1. Select Alerts & Logging > SNMP
2. Select Primary SNMP Manager tab. The Primary and Secondary SNMP Manager tabs are used to
configure where and how outgoing SNMP alerts and notifications are sent. If you require your console
server to send alerts via SNMP, at a minimum, a Primary SNMP Manager must be configured.
Optionally, a second SNMP Network Manager with its own SNMP settings can be specified on the
Secondary SNMP Manager tab
To Next Page
Loading...
Need help?
General
